The Importance of Filtration in Compressed Air System Design

To improve air quality and free air of any contamination, a proper filtration system is essential. Most contaminants in a compressed air system design are cleaned by filtration; however, other methods may also be required.

A compressed air purification system is often necessary to deliver uncompromising performance, reliability and the right balance of air. While there are some who purchase a low-cost air filter to avoid costs, it’s important to buy high-quality options that contain adequate filters and carbon steel tubes.

Other Filtration Considerations:

Here are three other considerations to keep in mind when it comes to filtration:

▪ It’s recommended to use water separators to remove condensed water. The Domnick Hunter water separator can remove more than 90% of bulk liquid contamination. 

▪ Coalescing filters can be used to remove aerosols, dirt, bulk condensed water particulates, micro-organisms and liquid oil. 

▪ Absorption filters, dust removal filters, micro-biological filters and others are also available.

To learn more about the importance of filtration in a compressed air system design, visit: http://www.airenergy.com.au/

Why the Use of Carbon Steel Tube Fitting Is On the Rise

We all know the importance of carbon steel fittings for industrial purposes. Not only are they durable and last a long time, but their hypo-allergenic qualities also make them an obvious choice for any harsh industrial environment. As a result, you’ll find that products such as Domnick Hunter are becoming more common.

This significant rise in the use of carbon steel tube fittings also results from industrial constructions that don’t require stainless steel pipe fitting for their compressed air system design.

What Can Carbon Steel Tubes be Used For?

Carbon steel tubes can be used for oil and diesel fuel lines in addition to closed circuit cooling, heating water systems, and sprinkler systems. They are also often used for compressed air and inert gas systems as well as for compressed air system design.

To learn more, visit: http://www.airenergy.com.au/

Tips for Choosing the Best Atlas Copco Compressor Provider

We can all agree that compressors and filters are of vital use for any industry, helping to maintain the cleanliness of the air while ensuring toxic waste is not circulated.

One such air compressor in Melbourne that is commonly used in industrial environments is the Atlas Copco compressor. But before choosing a provider, it’s important to keep the following tips in mind.

Top Three Tips:

► The provider should ideally have experience in the market, already have a large client base, and offer effective and efficient services. 

► You should ask around for recommendations or request references so you can read reviews and determine the level of customer satisfaction they provide. 

► The aluminium pipe products and other items offered by them must be certified and should also be available at affordable prices.

For more helpful tips on choosing the right provider of an air compressor in Melbourne, visit: http://www.airenergy.com.au/

The Importance of Compressed Air Piping

It is impossible for any manufacturing unit to survive without a compressed air piping framework. There are so many industrial applications that are dependent on this framework to uphold the smooth functioning of all processes.

The main functionality of a compressed air filter is to remove airborne particles from a moving pressurised air stream. However, it’s important for this air purification equipment to offer the perfect balance between air quality and a low operating cost.

Finding a Supplier of Compressed Air Filters:

If you search on the internet or through your local yellow pages directory, you will find many manufacturers and stainless steel pipe suppliers offering high-quality compressed air filters.

But before choosing one, it’s critical that you check the credentials of all companies you’re considering.

If you’re looking for more information on compressed air piping, or need assistance locating a reputable stainless steel pipe supplier, visit http://www.airenergy.com.au.

How Compressed Air Filters Work

Compressed air filters are special types of filters that are primarily used to remove contaminants such as dust, water, oil, and others. A compressed air filter within a stainless steel pipe system will ensure the air remains clean. However, the air that exits a screw or piston compressor will have high water content, as well as high levels of other contaminants, so different filters are needed to serve different purposes.

The unfiltered air usually contains dust, oil, rust and moisture, making filtration vital. In the initial stage, this unfiltered air will pass through the air compressor, which absorbs larger particles and condenses moisture into droplets that pass through a separation chamber.

The condensed particles then form a honeycomb before they travel downwards through the compressed air filters to the drainage system. In this stage, more than 90% of the air is cleared.

To learn more about installing compressed air filters for an air compressor in Melbourne, visit: www.airenergy.com.au.

How Contaminants in an Industrial Air Compressor Can Affect Performance

When it comes to compressed air distribution, one thing you should not forget is the harm that can be caused by condensation and other contaminants.

If you want to enhance the performance of your industrial air compressors and maximise efficiency, you should take steps to remove these contaminants within your compressed air system design.

Some of the contaminants that can occur in the system include:

• Water (vapor and fluid)
• Oil (vapor and fluid)
• Pipe rust and scale
• Soil
• Micro organisms

These contaminants can enter the stainless steel pipe system from the environment, from the piping framework, and even through the air compressor itself. Unfortunately, these contaminants can impact on the performance of the compressed air distribution system very quickly, so it’s recommended that you hire a professional to deal with the issue as soon as possible.

One solution that can be used to get rid of contamination within industrial air compressors is called dry-filter-separate.

If you would like to learn more about this solution or others, visit http://www.airenergy.com.au/.

The Industrial Benefits of Using Polypropylene Pipes

The use of polypropylene piping (otherwise known as pp pipe) for industrial purposes has been on the rise in recent years.

The tendency of these pipes to sustain harsh industrial environments makes them an obvious choice, and they also have a multitude of additional benefits.

Here are just a few:

• Polypropylene PP pipes are non-corrosive, enabling them to withstand harsh toxic materials that may flow through the pipe. 

• Their chemical resistant tendency makes them a go-to solution when it comes to press fittings of pipes for industrial applications. 

• They are easy to maintain and safe to use. 

• They can be recycled, saving money and providing a sustainable option that’s great for the environment. 

• PP pipes within a stainless steel pipe system offer exceptional durability and chemical resistant features.

If you’re looking for an effective pipe system for industrial purposes, PP pipes are a top choice.

For more information on PP pipes and press fittings, visit www.airenergy.com.au.